Audited Supplier
KLY-S72-D 72*72mm Square Panel Type Synchronization Meter S-D type AC Electrical Angle 15~345 Synchroscope Meter
SYNCHROSCOPE
Synchroscope is a high-tech designed products, there is no need to install synchronous controllers when using synchroscope so the cost of generators and machine control cabinet is reduced and the line is simplified. And what's the most important, it improves the stability of generators and machine control cabinet.
1. 36 LED in a circle
2. SYNC
The LED shall be lit when the phase difference is lower the presetting difference.
3. DC POWER
The LED shall be lit when the power is supplied.
4. MAINS
The LED shall be lit when electric network or Bus-bar is supplied power.
5. ENABLED
The LED shall be lit when the synchronization is been accepted.
6. BREAKER CLOSURE RELAY
The switching signal shall be showed synchronously if the phase difference is lower than presetting difference and meanwhile the LED is lit when the synchronization is been accepted.
7. GEN
The LED shall be lit when generator is supplied with power.
