Audited Supplier
HS-1102H
Carbon Chain Polymer
Turbid Liquid
200-900cP
10.0-80.0min
Xinshen/Huake
IBC Tank/Drum
Unsaturated Polyester Resin
Jiangsu, China
3907910000
Product Description
Product Name: HS-1102H Unsaturated Polyester Resin
1. Brief Introduction:HS-1102H is an unsaturated polyester resin with medium reactivity, pre promotion, thixotropy, good wetability to glass fiber, stable curing speed and good workability. It has excellent water resistance and excellent comprehensive mechanical properties. It is suitable for hand lay-up/spray molding process to produce GRP products such as glass fiber craft, sculptures, decorations etc. This product complies with the relevant standards of EU RoHS regulations on the content of lead, cadmium, hexavalent chromium, polybrominated biphenyls and polybrominated diphenyl ethers.
2.Technical Data Sheet for Liquid Resin:
| Item | Unit | Standard Requirements | Test Method |
| Appearance | -- | Turbid Liquid | GB/T 8237.6.1.1 |
| Viscosity(25ºC) | cP | 200-900 | GB/T 7193.4.1 |
| GelTime(25ºC) | min | 10-80 | GB/T 7193.4.6 |
Gel time test:Curing agent M-50(AKZO)1%.
3. Physical properties of casting(for reference only):
| Item | Unit | SeriesTest Value | Test Method |
| Tensile Strength | MPa | 70 | GB/T 2568 |
| Tensile Modulus | % | 3140 | GB/T 2568 |
| Tensile Elongaton | % | 3.1 | GB/T 2568 |
| Flexural Strength | MPa | 120 | GB/T 2570 |
| Flexural Modulus | MPa | 3970 | GB/T 2570 |
| Impact Toughness | kJ/m2 | 8.3 | GB/T 2571 |
| HDT | ºC | 72 | GB/T 1634 |
| Barcol Hardness | -- | 40 | GB/T 3854 |
Note:
4. Instruction and attention:
5. Storage:
1) Avoid exposure to heat sources such as direct sunlight or steam pipes. Stored in a dry place at temperatures below 25ºC.
2) Keep sealed to prevent moisture pick-up and monomer loss. Prolonged storage outside of recommended conditions can influence liquid resin properties like viscosity and gel time.
3) Transportation should fit the State Council "Chemistry Dangerous Articles Safety Management Regulations". Because it contains styrene monomer, it is hazardous and inflammable.
1) Method for making of cured performed as GB/T 8237-2005, Curing agent:AKZO M-50: 1.5%;
2) Post-cure:room temperature×24h + 60ºC×3h + 100ºC×3h.
4. Instruction and attention:
1) The user shall select the corresponding type of resin according to the specific environmental conditions and construction process requirements.
2) HS-1102H is a thixotropic resin. The thixotropic agent sometimes settles during storage. It needs to be stirred gently before use to make it disperse evenly again.
3) The product should be stored in a cool place below 25 ºC to avoid fire, isolate heat sources such as direct sunlight or steam), and ensure that the barrel is sealed to prevent moisture intrusion and monomer volatilization.
5. Storage:
1) Avoid exposure to heat sources such as direct sunlight or steam pipes. Stored in a dry place at temperatures below 25ºC.
2) Keep sealed to prevent moisture pick-up and monomer loss. Prolonged storage outside of recommended conditions can influence liquid resin properties like viscosity and gel time.
3) Transportation should fit the State Council "Chemistry Dangerous Articles Safety Management Regulations". Because it contains styrene monomer, it is hazardous and inflammable.
Q: Is Your Company a Manufacturer?
A: Yes, indeed.We have 48,800 square meters factory located in Jiangsu Province, China.
A: Yes,we can provide 1kg of resin as a free sample, but freight are typically the responsibility of the buyer.
Q: Do you have OEM/ODM service?
A: Yes, we are highly flexible in offering OEM/ODM services.
Q: Can I Customize the Formulation of Unsaturated Polyester Resin for My Project?
A: Yes, absolutely. We understand that different projects may have unique requirements. Our R & D department is well-equipped to handle custom formulations based on your specific needs. You can provide us with the details of your project, including any specific characteristics or performance criteria you are looking for, and our experts will work on tailoring a formulation that meets your requirements.
Q: How Do I Choose the Right Unsaturated Polyester Resin for My Application?
A: We would provide guidance on selecting the appropriate UPR based on different project requirements.
Q: What Certifications and Quality Standards Does Your Unsaturated Polyester Resin Meet?
A: Our Unsaturated Polyester Resin meets CCS, RoHS, REACH, EMS, and QMS certifications and quality standards.
Q: What is Your Company's International Transportation Form?
A: For samples, we offer Delivery Duty Paid (DDP) services for most of the countries. This means that we handle the delivery process, including the payment of taxes, and you won't be required to manage customs clearance. For bulk orders, we normally transported by sea or land. Our commitment is to ensure the secure and efficient delivery of our products to your specified destination.
Q: What is The Product Lead Time?
A: 15 days.
Q:Can I Get a Lower Price for a Large Quantity Order ?
A: Absolutely. The online price serves as a reference, but due to fluctuations in raw material costs, our sales team can provide you with the most accurate and competitive pricing. Before making a purchase, kindly engage with our sales representatives. They will work closely with you, taking into account your order quantity and specific requirements, to ensure you receive the best and most cost-effective pricing tailored to your needs.
Q:What's Shelf Life of Unsaturated Polyester Resin ?
A: Normally 6 months.
