Audited Supplier
LX-ZRBY02
Sintering Conductor Pastes
Powder
Silver
Silver
Longxin
Plastic Bucket
20-25kg/bucket
China
Product Description
Pricing Options for Longxin Nano Silver Powder: 1 year CN. For quantities ranging from 100 to 499 grams, enjoy a rate of just $1.44 per gram. For orders between 500 and 999 grams, benefit from the reduced price of $1.36 per gram. For bulk purchases of 1000 grams or more, take advantage of our best price at only $1.29 per gram.
Model | ZRBY-02 |
Application Areas | Photovoltaic cell back electrode silver paste, ceramic metallization paste and other sintering conductor pastes |
Average particle size (μm) | 0.40-0.75 |
Bulk density (g/cm³ ) | 1.30-2.50 |
Tap density (g/cm³ ) | 3.50-4.80 |
Specific surface area m²/g | 1.20-2.00 |
Currently, shipping solutions for your chosen quantity aren't available. Item subtotal (0 variations, 0 items): $0.00. Shipping total: $0.00. Overall subtotal: $0.00.
Comprehensive Protections for Your Purchases: Enjoy peace of mind with secure payments through , safeguarded by advanced SSL encryption and PCI DSS protocols. Our standard refund policy ensures you can claim a refund if your order doesn't ship, arrives incomplete, or has product issues. Trust in to protect every order you make and pay for on the platform.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
