Audited Supplier
E309-16
H (Heat Resistant Low Alloy Steel/ Stainless Steel Electrode)
Stainless Steel
2.0~5.0mm
300-400mm
Stainless Steel
Titanium Calcium
Acidic
Chromium Stainless Steel
Low Hydrogen Type Electrode, Gravity Electrode, Moisture-Proof Electrode
DC/AC
JINYUAN
Customized
3.2x350mm 2.5x300mm 4.0/5.0x400
China
8311100000
Product Description
The whole is made of high-quality steel, which is not easy to rust, has a smooth surface and a long service life.
Professional production technology, stable structure, attention to every detail.
Professional production technology, stable structure, attention to every detail.
Use professional testing equipment to strictly test products to ensure product quality.
Basic Info.
| Model NO. | E308-16, E308L-16, E309-16, E309L-16,E312-16,E316L-16 |
| Length | 300-400mm |
| Electrode Coating Type | Titanium Calcium |
| Welding Power | AC/DC |
| Origin | China |
| Diameter | 2.0~5.0mm |
| Welding Core Type | Stainless Steel |
| Transport Package | Carton |
| Function | For welding of the working temperature is less than 300 ºC corrosion resistant stainless steel structure, such as SUS304 etc.. |
| Trademark | JINYUAN |
Product Specification
| E309-16 | |||||||||
| Chemical Composition Of Deposited Metal (%) | |||||||||
items | C | Mn | Si | Cr | Ni | Mo | Cu | S | P |
Requirements | ≤0.15 | 0.5-2.50 | ≤1.00 | 22.0-25.0 | 12.0-14.0 | ≤0.75 | ≤0.75 | ≤0.03 | ≤0.04 |
Typical Results | 0.06 | 0.89 | 0.69 | 24.05 | 12.5 | 0.10 | 0.08 | 0.010 | 0.028 |
| Mechanical Properties of Deposited Metal (AW) | ||
items | Tensile Strength Rm (MPa) | Elongation A4(%) |
Requirements | ≥550 | ≥25 |
Typical Results | 600 | 38 |
| E308-16 | |||||||||
| Chemical Composition Of Deposited Metal (%) | |||||||||
| items | C | Mn | Si | Cr | Ni | Mo | Cu | S | P |
| Requirements | ≤0.08 | 0.5-2.5 | ≤1.00 | 18.0-21.0 | 9.0-11.0 | ≤0.75 | ≤0.75 | ≤0.03 | ≤0.04 |
Typical Results | 0.06 | 0.87 | 0.67 | 20.00 | 9.50 | 0.09 | 0.08 | 0.010 | 0.025 |
| Mechanical Properties of Deposited Metal (AW) | ||
| items | Tensile Strength Rm (MPa) | Elongation A4(%) |
| Requirements | ≥550 | ≥30 |
Typical Results | 596 | 43 |
| E308L-16 | |||||||||
| Chemical Composition Of Deposited Metal (%) | |||||||||
| items | C | Mn | Si | Cr | Ni | Mo | Cu | S | P |
| Requirements | ≤0.04 | 0.5-2.50 | ≤1.00 | 18.0-21.0 | 9.0-11.0 | ≤0.75 | ≤0.15 | ≤0.03 | ≤0.04 |
| Typical Results | 0.029 | 0.86 | 0.63 | 19.80 | 9.60 | 0.10 | 0.022 | 0.012 | 0.024 |
| Mechanical Properties of Deposited Metal (AW) | ||
| items | Tensile Strength Rm(Mpa) | Elongation A4(%) |
| Requirements | ≥520 | ≥35 |
Typical Results | 575 | 46 |
| E309L-16 | |||||||||
| Chemical Composition Of Deposited Metal (%) | |||||||||
items | C | Mn | Si | Cr | Ni | Mo | Cu | S | P |
Requirements | ≤0.15 | 0.5-2.50 | ≤1.00 | 28.0-32.0 | 8-10.5 | ≤0.75 | ≤0.75 | ≤0.03 | ≤0.04 |
Typical Results | 0.085 | 1.11 | 0.78 | 29.39 | 9.97 | 0.16 | 0.2 | 0.011 | 0.028 |
| Mechanical Properties of Deposited Metal (AW) | ||
items | Tensile Strength Rm (MPa) | Elongation A4(%) |
Requirements | ≥510 | ≥25 |
Typical Results | 565 | 41 |
| E312-16 | |||||||||
| Chemical Composition Of Deposited Metal (%) | |||||||||
items | C | Mn | Si | Cr | Ni | Mo | Cu | S | P |
Requirements | ≤0.15 | 0.5-2.50 | ≤1.00 | 28.0-32.0 | 8-10.5 | ≤0.75 | ≤0.75 | ≤0.03 | ≤0.04 |
Typical Results | 0.085 | 1.11 | 0.78 | 29.39 | 9.97 | 0.16 | 0.2 | 0.011 | 0.028 |
| Mechanical Properties of Deposited Metal (AW) | ||
items | Tensile Strength Rm (MPa) | Elongation A4(%) |
Requirements | ≥660 | ≥15 |
Typical Results | 785 | 26 |
| E316L-16 | |||||||||
items | C | Mn | Si | Cr | Ni | Mo | Cu | S | P |
Requirements | ≤0.04 | 0.5-2.50 | ≤1.00 | 17.0-20.0 | 11-14 | 2-3 | ≤0.75 | ≤0.03 | ≤0.04 |
Typical Results | 0.030 | 1.01 | 0.68 | 19.01 | 11.82 | 2.46 | 0.08 | 0.015 | 0.025 |
| Mechanical Properties of Deposited Metal (AW) | ||
items | Tensile Strength Rm (MPa) | Elongation A4(%) |
Requirements | ≥490 | ≥25 |
Typical Results | 580 | 45 |
Attention:
1.The electrode must be re-dry by 320ºC-350ºC for 1 hour before welding,2.The rust, oil, water and other impurities of the weld area must be removed before welding.
3.DC*is better than AC, lower heat input is suggested, the temperature of preheat and interpass keep under 150ºC
Packing Details
Certification:
Conpany Profile 
