Molten Iron Analyzer Before Grey Port Cast Iron Furnace

The CYY-LK2 Carbon Silicon Analyzer is based on the CYY-TL1 Carbon Silicon Analyzer. It has been upgraded with system enhancements so that it can not only analyze data such as carbon and silicon content, but also estimate the hardness and tensile strength of the material. The instrument is also equipped with a printing function to facilitate data record keeping. The instrument adopts portable design, which enhances the anti electromagnetic interference performance and dust-proof performance. It is simple and convenient to operate. A small ladle of molten iron can be poured into the pouring cup by the furnace worker, and a series of data such as carbon and silicon content of molten iron can be measured.

Technical parameters

      1. The instrument is suitable for testing the data of C%, Si%, cel, SC, △ T, △ TM% of white cast iron, gray cast iron, nodular cast iron and Maanshan Iron and steel, and calculating the tensile strength RM and hardness Hb of non alloy cast iron.

     2. The improved evaluation method can automatically control the important metallurgical parameters, which makes up for the shortage that the spectrum analyzer is difficult to accurately measure the non-metallic element carbon and silicon, and the requirement that the conventional instrument can not quickly analyze.
 

      Installation and use method

    1. Use a 220v power supply with a grounded triangular plug socket, and confirm that the power socket is correctly connected and well grounded!

    2. Avoid installing the instrument in an environment with a strong magnetic field or electric field.

    3. A series of data such as the carbon, silicon and manganese content of the molten iron can be measured by the furnace worker by the way, by pouring a small scoop of molten iron into the pouring cup.

     Operation interface, functional features
    
     1. Power on then turn on the power and press the power button once;

     2. After startup, the system will automatically enter the interface of composition determination
   
      Interface description:
   
    The sample cup is installed on the supporting bracket of the instrument. The instrument displays the current indoor temperature. The furnace operator only needs to ladle a ladle of hot metal (about 1300 ºC is recommended) into the sample cup. The instrument starts automatic analysis, dynamically displays the analysis process curve in real time, and automatically saves the analysis results. According to the content of the results, it automatically calculates the amount of carburizer, ferrosilicon and scrap that need to be added.

Application field