Audited Supplier
60mm
If Has Quality Defects, a New One Will Be Made.
180 Days
DIN, JIS
Cutting, Heat Treatment, Pta Welding, Casting
Long Working Life
Alloy Steel
OULIN
Plywood Case
60mm
China
84779000
Product Description
Detail Information For Nanrong Injection Molding Machine 280T 60mm Bimetal Screw and Barrel for Nylon with 40% Glassfiber:
Application: for Nylon with 40% glassfiber, Nanrong injection molding machine
Customer's Requirement: good abrasive resistance, long working life.
Screw's quality: bimetallic screw, 30% tungsten carbide powder be added into alloy layer.
Barrel's quality: OLIN-AR02 bimetallic barrel, better abrasive resistance, medium corrosive resistance.
Detail Information For All Brand Injection Molding Screw and Barrel:
Brief introduction:
it can be used in vertical& horizontal type injection molding machine, has different quality for different working sotuation, we can design it according to different material or customers'requirements.
Specification:
Diameter: Ø20mm-Ø300mm
Clamping force: 100KN-35000KN
Shot weight: 30g-30000g
Quality:
there are many different quality can be chosen, from normal nitriding quality to best abrasive& corrosive resistance, welcome to contact us.
Heat treatment:
Advance hardening and tempering
Nitriding treatment
Mid/high-frequency quenching
Vacuum hardening
Technical Parameters:
Nitriding depth: 0.50mm-0.80mm
Nitriding hardness: HRC56-58
Surface roughness: Ra 0.4
Screw straightness: 0.015mm
Alloy layer depth: 3mm
Hardness for alloy layer/ fully hardened screw: HRC56-64
OULIN SCREW: YOUR LOYAL PARTNER FOR SCREW AND BARREL~
COMPANY OVERVIEW:
Application: for Nylon with 40% glassfiber, Nanrong injection molding machine
Customer's Requirement: good abrasive resistance, long working life.
Screw's quality: bimetallic screw, 30% tungsten carbide powder be added into alloy layer.
Barrel's quality: OLIN-AR02 bimetallic barrel, better abrasive resistance, medium corrosive resistance.
Detail Information For All Brand Injection Molding Screw and Barrel:
Brief introduction:
it can be used in vertical& horizontal type injection molding machine, has different quality for different working sotuation, we can design it according to different material or customers'requirements.
Specification:
Diameter: Ø20mm-Ø300mm
Clamping force: 100KN-35000KN
Shot weight: 30g-30000g
Quality:
there are many different quality can be chosen, from normal nitriding quality to best abrasive& corrosive resistance, welcome to contact us.
Heat treatment:
Advance hardening and tempering
Nitriding treatment
Mid/high-frequency quenching
Vacuum hardening
Technical Parameters:
Nitriding depth: 0.50mm-0.80mm
Nitriding hardness: HRC56-58
Surface roughness: Ra 0.4
Screw straightness: 0.015mm
Alloy layer depth: 3mm
Hardness for alloy layer/ fully hardened screw: HRC56-64
OULIN SCREW: YOUR LOYAL PARTNER FOR SCREW AND BARREL~
COMPANY OVERVIEW:
