Audited Supplier
Single Mast Double drum 40ton 550hp Fast Rapid No-Guyline pulling Unit hoist Workover rig
No-guyline workover is an innovative revolution for traditional workover rig, it is no longer subject to the geographical location and surface conditions of oil field, eliminating the installation and pulling out of the fixed anchor before and after the operation, greatly reducing the installation and operation area, reducing the operating time and complexity of operations, improving the working efficiency, so it suitable for all kinds of harsh and complex ground conditions and climate environment, especially for urban areas, desert or other small or complex areas where guy lines are not convenient.
The profile of mast is a trapezoidal structure, which increases the strength and stiffness of mass The mast body and back bracket are connected by automatic pull rod to facilitate operation The rear of chassis adopts a large span hydraulic telescopic jack, which increases the distance between the fulcrum and improves the stability of vehicle.| Technical parameters | Unit | 550hp | |
| Nominal service depth | 73mm(2-7/8'')EUE Tubing | m | 3200 |
| Nominal workover depth | 73mm (2-7/8'' )DP | m | 2000 |
| Max. Hook Load | kN | 675 | |
| Rated Hook Load | kN | 400 | |
| Drawworks HP rating | kW | 206 | |
| Mast Height | m | 18(single section) | |
| Qty. of effective rope | 6 | ||
| Wirelines diameter | mm | 22 | |
| Lifting speed of hook | m/s | 1-1.5 | |
| Moving dimension (length x width x height) | m | 15.10×2.50×4.00 | |
| Weight | kg | 29460 | |
| Chassis | Steyr | ||
1. How do we ensure?
Answer:
(1)Always pre-production samples before mass production;
(2)Always final inspection before shipment;
(3)We choose advanced production technology and equipment, strictly control the whole production process and check the finished drill bits, and also make several design changes according to customer's feedback, and finally ensure excellent drilling results for our customers.
2. Is the product manufactured in accordance with the standard?
Answer:
YES. All our activities are certified by API, in terms of products and services, while proven production techniques ensure that the quality meets international requirements, and we carry out rigorous checks during production
3. Why should you buy from us instead of other suppliers?
Answer:
(1)Long history, exquisite technology
(2)Independent research and development, reliable quality Complete flexible production line
(3)Rich varieties, including tungsten carbide insert drills, steel tooth drills, hard disk openers, single cone drills, and tooth wheel cutters.
(4)Excellent pre-sale and after-sale service system
4. Are you a trading company or a manufacturer?
Answer:
We are trading company, but we can offer you competitive drill bits. We have supplied to many countries.
5. Time of delivery and time of shipment?
Answer:
Beijing airport takes 3-5 days for transportation. Even for small or urgent orders, we can ship you by air after receiving youragreement. Depending on the distance from China to your port, it usually takes about 25-30 days from China to Europe. To Western USA 20-25 days.
