Audited Supplier
Product Description
Product Description
Shaanxi Fanyang Construction Technology Co. Ltd
Product Description: RUbber-plsatic Foamed Heat Preservation Products (PVC/NBR)
We produce RUbber-plsatic Foamed Heat Preservation Products (PVC/NBR) using the newest technology and craft, along with an automatic processing line. Our products are made from NBR/PVC, which undergo ban bury, vulcanization, and foam processes. As a result, our products possess the following characteristics:
- Low density
- Close bubble structure
- Low thermal conductivity
- Extremely low water vapor transmissibility
- Low water-absorptive ability
- Well-performing fire-proof performance
- Superior anti-aging performance
- Good flexibility
- Easy to install
Our RUbber-plsatic Foamed Heat Preservation Products are suitable for a wide temperature range, from -40ºC to 105ºC. They also exhibit excellent anti-aging performance and durability. Furthermore, our products meet the national B1 level standard for fire-proof capacity.
Product performance index
| 1 | surface density | Kg/m³ | ≤95 | 46 | |
| 2 | oxygen index | % | ≥32 | 34.4 | |
| 3 | Smoke density | / | ≤75 | 28 | |
| 4 | thermal conductivity | Average temperature::-20ºC | W/(m·K) | ≤0.034 | 0.030 |
| Average temperature::0ºC | W/(m·K) | ≤0.036 | 0.033 | ||
| Average temperature::40ºC | W/(m·K) | ≤0.041 | 0.038 | ||
| 5 | Wet resistance factor | Moisture permeability | G/(m·s·Pa) | ≤1.3*10-10 | 8.7*10-11 |
| Moisture permeability coefficient | / | ≥1.5*102 | 2.3*103 | ||
| 6 | Vacuum water absorption | % | ≤10 | 3 | |
| 7 | Compression springback rate Compression ratio 50% Compression time 72 h | % | ≥70 | 89 | |
| 8 | ageing resistance ,150h | / | Slight wrinkle, no crack, no pinhole, no deformation | pass through | |
Product Description
Rubber and Plastic Insulation Materials
Shaanxi Fanyang Construction Technology Co. Ltd offers two types of rubber and plastic insulation materials: insulation boards and insulation pipes.
Rubber and Plastic Insulation Pipe
The rubber and plastic insulation pipes are available in various diameters, including ⊘25, ⊘32, ⊘40, ⊘50, ⊘60, ⊘76, ⊘89, and ⊘108 (mm). These pipes are designed to provide efficient insulation for various applications.
Rubber and Plastic Insulation Board
The rubber and plastic insulation boards have a standard width of 1500mm and a length of 8000mm. Customization is available for non-standard shapes based on specific requirements.
Fire Protection Level
The insulation materials are classified into two fire protection levels: B1 and B2. We recommend choosing the B1 level for enhanced safety.
Insulation Thickness
The conventional insulation layer thickness options include 15mm, 20mm, 25mm, 30mm, 35mm, and 40mm. For thicker insulation layers (35mm and 40mm), it is advisable to consider the project requirements, typically ranging from 2000m to 5000m.
Product Quality and Warranty
Our products are manufactured to meet high-quality standards, and everything is based on samples. Under normal conditions, the insulation materials can be used for up to ten years without any issues. However, exposure to harsh environments, such as wind, sun, rain, or corrosive gases, may reduce the service life.
Transportation
For transportation, we recommend using the designated ports, such as Tianjin Port or Qingdao Port, as specified by Party A.
