Audited Supplier
ZW32
High Voltage Circuit Breakers
Electric Type
Normal Type Circuit Breaker
Air
Fixed
ACB
3
Circuit Breaker
Conventional Circuit Breaker, Circuit-Breaker Failure Protection
VDE, ISO9001-2000, Tape Tested
FARADY
Wooden Case
Zhejiang, China
8535210000
Product Description
Overview
ZW32-12 is applied to three-phase AC 50Hz, rated voltage is 7.2 ~ 12kV of outdoor high voltage switch equipments.Circuit breaker in accord with the national standard GB1984 "high voltage AC circuit breaker" and "professional standards JB3855 3.6 ~ 40.5kV outdoor AC high-voltage vacuum circuit breaker" and the related IEC standards. Pole Mounted Circuit Breaker is widely used in10KV distribution network(power plant and substation for electric equipment control and protection),substations,industrial companies,mining companies etc.A circuit breaker having repeatedly interrupting and fast re-closing ability.No transformer oil or SF6 gas inside it, it meets the non oil improvement and environment protection requirements.
Service Condition
1. Altitude not exceeding 2000m;2. Ambient temperature: -30°c ~+40°c;
3. Pressure: No more than 700 pa(the equivalent of wind speed 34m/s)
4. Earthquake level not exceeding 8 class;
5. Pollution level: 3
Technical Parameters
| Product Name | ZW32 11kv pole mounted power circuit breaker 630A electric automatic circuit recloser |
| Type | Vacuum Breaker |
| Rated Voltage | 11KV / 12KV |
| Rated Short-Circuit Breaking Current | 20KA / 25KA , 31.5KA |
| Rated Current Rated Current | 630A ,1250A, 1600A,2000A,2500A, 3150A |
| Frequency | 50HZ |
| Alitude | Not exceed 1000m |
| Ambient Temperature | not higher than +40 °C , not less than -15 °C |
| Certificate | ISO9001 |
| Machanical Life | 10000 times |
| RMS | 20KA /25KA , 80KA |
| Dynamic Stability rated current(peak) | 63KA , 80 KA |
| Rated short-circuit closing current(peak) | 63KA |
| Rated short-Circuit closing breaking current breaking number | 50 Times |
| Rated operating sequence | O-0.3s-CO-180s-CO |
| Rated thermal stabilization time | 4s |
Packaging & Shipping
About Us
Founded in 1996, with a registered capital of 10 million USD, Zhejiang Farady Electric enjoys about 20 years' experience in MV transmission and distribution electrical equipment manufacture.We are National Hi-tech enterprise, National Spark plan Program,State Hi-tech enterprise, State Innovation R&D center, Patent demonstrate company.
Farady is located in Liushi of Yueqing, Zhejiang,China,main products include: Transformer/RMU/switchgear/AVR/ACR and MV indoor and outdoor switch. All the products of ours have passed the national and international laboratory type test, Farady Electric was qualified supplier of China State Grid and China southern Grid.
With ISO9001/14001/18001, we are strike for create value for our partner and customer.
There is more than 20 distributors and agents worldwide already trust us and distribute Farady product there, we are not only export product, but also provide whole technology solution to help partner to establish local factory in our business line.
Today, boasting the value of products specialization, brand management, and business globalization, with the sprits of pragmatism, innovation, efficiency, and responsibility, Farady Company is dedicated to become the top name in the international business from china, and contributes its share to the transformation from the Made in China into the Invented in China.
Our Advantages
(1). Energy conservation: Farady voltage regulating type capacitors will change the output reactive power by regulating voltage on capacitors, so that the reactive power can be adjusted smoothly. Comparing with other method, it can ensure the capacitors in best condition, the energy saving effect is much better(2). Low cost:If the old power transformer substation need to reform, only need to add a voltage regulator between the circuit breaker and capacitors, the original circuit breakers, reactors, capacitors can be reuse, greatly reduce the cost of transformation
(3). Maintance Free:When traditional circuit breaker and contactor switching, switching devices and capacitors often damaged because of the above problems, result in high maintenance costs, using Farady devices, automatic control reactive power output, there is no potential risks of other equipments, greatly reducing maintenance and staff costs in power transformer substation
(4) Quality Assurances
We have a strictly quality control process from the raw material to finished products. Advanced testing lab to make sure products quality and improve our creative ability. Quality and Safety is the soul of our products.
(5) Excellent Services
Many years of manufacturing experience and rich export business help us to establish a well-trained sales service team for all customers.
(6) Fast Deliveries
Strong manufacture capacity to satisfy urgent leading time. It is around 15-25 working days after we receive the payment. It varies according to the different products and quantity.
(7) OEM ODM and MOQ
Strong R&D team for quick new products' development, we welcome OEM, ODM and customize request order. Whether selecting a current product from our catalog or seeking engineering assistance for your application. You can tell us about your sourcing requirements
Normally our MOQ is 100pcs per models. We also produce OEM and ODM as you requirement. We are developing worldwide agent.
FAQ
1.Why choice us Farady?After compare quality,delivery and price you will find out answer
2. Is that possible to be one of distributor of Farady in my country?
Yes,once you action is fast enough
3,More question......
Feel free to contact you,you will get immediately reply
