Audited Supplier
7" RTTS PACKER
After Sales Service
10 Months
CNC Milling
Phosphating
10 MPa
Alloy
Fracturing Service
AISI 4140
10000 Psi
Eue
ZX
Wooden Case
5-1/2"
China
8431431000
Product Description
RTTS PACKER
The RTTS Packer is a full opening, hook wall type packer designed for use in testing, treating, and squeeze cementing operations. The full opening permits pumping large volumes of fluid with a minimum pressure drop, and allows the passage of a through tubing type perforating gun. This helps make the tool usable for multiple operations with one trip in the hole- such as perforate, test, treat, squeeze, perforate, etc. Generally, the tool is composed of a packer body assembly and circulating valve assembly. It may also include a safety joint.
RTTS packer consists of hydraulic anchor, rubber barrel, slip holder, slip, slip bracket, reversing friction block, outer central pipe, inner central pipe, upper joint and so on.
RTTS mechanical slip packer is supported by unidirectional slip. It's set by pulling, turning and lowering. Released by pulling the column.
We are a factory with API 11DA AND 5CT cert to produce down hole oil tools tubing anchor , gas anchor , torque anchor ,packer , pup joint and couplings for more than 20 years
The RTTS Packer is a full opening, hook wall type packer designed for use in testing, treating, and squeeze cementing operations. The full opening permits pumping large volumes of fluid with a minimum pressure drop, and allows the passage of a through tubing type perforating gun. This helps make the tool usable for multiple operations with one trip in the hole- such as perforate, test, treat, squeeze, perforate, etc. Generally, the tool is composed of a packer body assembly and circulating valve assembly. It may also include a safety joint.
Main Features
RTTS packer consists of hydraulic anchor, rubber barrel, slip holder, slip, slip bracket, reversing friction block, outer central pipe, inner central pipe, upper joint and so on.
RTTS mechanical slip packer is supported by unidirectional slip. It's set by pulling, turning and lowering. Released by pulling the column.
Principle
Setting : when going down the well, the control pin is at the short track. Pull the column up to content height when the packer has reached desired position,then lower the column and make the control pin tangential direction to long track. The slip extends and blocks in tube inwall. The barrel is compressed to realize sealing.
Releasing : pull column barrel up to make the slip reset to realize unsealing.
We are a factory with API 11DA AND 5CT cert to produce down hole oil tools tubing anchor , gas anchor , torque anchor ,packer , pup joint and couplings for more than 20 years
