Audited Supplier
Lx-APC057001
Solid: 70%
Electronics, Electronics Industry, Chip Varistors
7440-22-4
Black
Paste
70.0+-1.0%
Longxin
Silver Palladium Paste
Single Item
95/05
Guangdong, China
Kg
Electron Grade, Industrial Grade
Lx-APC057001
Xx Cm
Longxin
Carton
1kg/can
China
Product Description
Discover the unparalleled performance of our Silver-Palladium Internal Electrode Paste, meticulously crafted for Chip Varistors. This exceptional formulation ensures optimal conductivity and reliability.
Model | LX-APC057001 |
Solid content% | 70.0±1.0 |
Metal RatioAg/Pd | 95/05 |
Viscosity (dPa.s) | 25±5.0 |
Finenessμm | ≤5.0 |
Application | Chip varistors |
Currently, tailored shipping solutions for the specific quantity you selected are unavailable, but rest assured, we are constantly working to enhance our delivery services to meet your needs.
Protections for this product: Enjoy secure transactions with our robust SSL encryption and PCI DSS protocols safeguarding every payment made on . Easy Return & Refund: Seamlessly claim a refund for missing orders or any product issues, with the added convenience of free local returns for defects on eligible purchases. ensures comprehensive protection for all your orders placed and paid on the platform, offering peace of mind throughout your shopping experience.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
