
It featuresan OLED display screen, which remains visible even under sunlight. The shell is designed with a rubber-coated
plastic mould, possessing good waterproof performance. The utilization of anti-static materials enables it to meet the
explosion-proof requirements. It can continuously detect the concentration of toxic gas or oxygen in the ambient air of
industrial and mining enterprises, with a sensitive response and convenient portability. It has been widely utilized in industries
such as iron and steel metallurgy, petrochemical industry, emergency rescue, and industrial safety.

Specifications and configuration
Sensor | Electrochemical, Infrared, Galvanic cell |
Sampling Type | Diffussion |
Safety Certifications | Ex ib IIC T4 Gb II 1G Ex ia IIC T4 Ga 2014/30/EU (Electromagnetic Compatibility) |
IP Grade | IP66 |
Carried standard | GB12358-2006 |
Working Temp. | -20ºC~55ºC |
Humidity | 0%~95%,noncondensing |
Screen | OLED display |
Display Content | Gas symbol, gas unit, real-time value, battery, calibration information, temperature, time |
Alarm mode | 95dB/10cm buzzer,red and yellow LEDs flash,built-in vibration |
Alarm project | High Conc./Low Conc./TWA/STEL/Overrange/Low battery/Fall down alarms |
Alarm Set Point | Llimit value can be set freely |
Calibration method | Zero/full scale calibration |
Working current | Normal current: ≤0.1mA (when the screen is off), Alarm instantaneous current: ≤100mA |
Battery Type | Li-On rechargeable |
Battery Parameter | Rated voltage 3.7V, nominal capacity 500mAh |
Charging temp. | 0ºC~40ºC |
Shell Material | ABS,PC,anti-static TPE |
Size | 93mm×52mm×30mm( Contains no clip) |
Weight | About 98g |
Sensor Parameter
Gas | Principle | Range | Resolution | Accuracy | Low Alarm | High Alarm | STEL | TWA |
CO | Elec-chem | 0~1000PPM | 1PPM | ±10% | 24 PPM | 200 PPM | 200 PPM | 35 PPM |
H2S | Elec-chem | 0~100PPM | 1PPM | ±10% | 10 PPM | 15 PPM | 15 PPM | 10 PPM |
SO2 | Elec-chem | 0~100PPM | 1PPM | ±10% | 2 PPM | 5 PPM | 5 PPM | 2 PPM |
NH3 | Elec-chem | 0~100PPM | 1PPM | ±10% | 25PPM | 50 PPM | 30 PPM | 25 PPM |
CL2 | Elec-chem | 0~50.0PPM | 0.1PPM | ±10% | 0.5 PPM | 1 PPM | 1 PPM | 0.5 PPM |
HCN | Elec-chem | 0~30.0PPM | 0.1PPM | ±10% | 4.7 PPM | 10.0 PPM | 10 PPM | 4.7 PPM |
HF | Elec-chem | 0~10.0PPM | 0.1PPM | ±10% | 2.0 PPM | 4.0 PPM | 4.0 PPM | 2.0 PPM |
NO2 | Elec-chem | 0~100PPM | 0.1PPM | ±10% | 2.0 PPM | 5.0 PPM | 2.0 PPM | 5.0PPM |
O2 | Galvanic | 0~30.0%vol | 0.1PPM | ±3.0%FS | 19.5%vol | 23.5%vol | - - | - - |
H2 | Elec-chem | 0~1000PPM | 1PPM | ±10% | 100 PPM | 500 PPM | 500 PPM | 100 PPM |
CO2 | NDIR | 0~5.00%vol | 0.01%vol | ±5%FS | 0.5%vol | 1.0%vol | 1.0%vol | 0.5%vol |
VOCS | PID | 0~100PPM | 1PPM | ±5%FS | 10PPM | 20PPM | 20PPM | 10PPM |
Note: Please contact the manufacturer for confirmation before ordering. Other detection gases, range and alarm concentration can be customized if not listed.
* Due to ongoing research and product improvement, specifications are subject to change without notice.
Accessories
Operation manual, calibration cover, charger, Calibration certificate.



