Audited Supplier
w/ Flow Meter
Manifolds Installation
5 Years
EAC, TUV, GOST, ISO9001, ROHS, CE
Water Heating Systems
1"
Brass or Nickle Plated
W/ or W/O Flow Meter
with 16mm 20mm Pipes
16X1/2, 16X3/4, 20X3/4
ASB/OEM
Cartons/Pallet
2-12 ways
China
8481804090
Product Description
PRODUCT DISCRIPTION
Brass manifold with flow meter, with a manifold system, there is piping to each fixture. A water manifold is a section of pipe what has built in ports in it designed to distribute water.Use higher quality brass raw material, 100% leakage testing before shipping. Contact us for more details of Stainless steel manifold.
PRODUCT SPECIFICATION
PRODUCT DETAILS
WHY YOU USE ASB MANIFOLDS?
Brass manifold with flow meter, with a manifold system, there is piping to each fixture. A water manifold is a section of pipe what has built in ports in it designed to distribute water.Use higher quality brass raw material, 100% leakage testing before shipping. Contact us for more details of Stainless steel manifold.
PRODUCT SPECIFICATION
| Code | Size | Ways | L(mm) | D(mm) |
| 52443/52543 | 1" | 2 | 104 | 50 |
| 52443/52543 | 1" | 3 | 154 | 100 |
| 52443/52543 | 1" | 4 | 204 | 150 |
| 52443/52543 | 1" | 5 | 254 | 200 |
| 52443/52543 | 1" | 6 | 304 | 250 |
| 52443/52543 | 1" | 7 | 354 | 300 |
| 52443/52543 | 1" | 8 | 404 | 350 |
| 52443/52543 | 1" | 9 | 454 | 400 |
| 52443/52543 | 1" | 10 | 504 | 450 |
PRODUCT DETAILS
| Type | Brass heating manifold 1" | Brass heating manifold 1 1/4" |
| Connection | 1" Female thread | 1 1/4" Female thread |
| Version | 2 fold-12 fold | 2 fold-12 fold |
| Outflow | 3/4" Eurocone | 3/4" Eurocone |
| Valve distance | 50mm | 50mm |
| Equipment | * 1" profile pipe | * 1 1/4" profile pipe |
| * Thermostatic valves for manual regulation or electrica actuators 230V | * Thermostatic valves for manual regulation or electrica actuators 230V | |
| * Topmeter(0.5-2.5l/min) or fine regulating valves 3/8" | * Topmeter(1-4l/min) or fine regulating valves 1/2" | |
| * Sealing end | * Sealing end | |
| * Ventilation valve | * Ventilation valve | |
| * 3/8" end plug | * 1/2" end plug | |
| * Sound-insulating fastening elements | * Sound-insulating fastening elements | |
| * Sticker for marking the heating cycles | * Sticker for marking the heating cycles |
WHY YOU USE ASB MANIFOLDS?
ASB Flow meter heating manifold are designed for use with hydronic underfloor heating systems. They can either be used in conjunction with a pump/blender unit or coupled directly to the centrally blended/pumped heat source.
The manifold is manufactured from Hpb58 brass or pressed stainless steel and is run through stringent testing procedures throughout the manufacturing process. Following completion, every manifold is tested to 6 bar pressure (typical operating pressure would be less than 3 bar).
As standard, the manifold comes with a manual air vent, which can easily be upgraded to an automatic version. A fill/drain point with hose connector is located on both the flow and return bar
