Audited Supplier
We are a Glass-Fused-To-Steel tank production factory in China. The tank is assembled on-site from special enamel steel plates, stirrups, self-locking bolts, special sealing material, and other accessories. Our factory was established in 1989 and started GFS tank production in 2005.
Usually used for potable water storage and Water Tanks for Fire Protection.
Hebei Wansheng Environmental Protection Engineering Co., Ltd. with a registered capital of 10 million, covers an area of more than 20000 square meters and has more than 200 employees. After years of development and innovation, we are already the first-class GFS bolted tank R & D and production enterprise in the world.
| Coating color | dark blue, dark green, white, and customized |
| A standard steel plate size | effective size 2400mm x 1200 m |
| Steel plates thickness | 3mm - 12mm, depending on the diameter & height |
| Coating thickness | 0.25mm - 0.4mm, two coatings internal and external |
| Acid and alkalinity-proof | standard coating suits for PH3 - PH11, special coating suits for PH1 - PH14 |
| Adhesion | 3,450N/cm |
| Elastic | same as steel sheet, around 500KN/mm |
| Hardness | 6.0 Mohs |
| Service life | >30 years |
| Spark test | >1500 V |
| Permeability | gas and liquid impermeable |
| Easy to clean | smooth, glossy, inert, anti-adhesion |
| Corrosion resistance | excellent! Suitable for wastewater salt water, seawater, high sulfur crude oil, salt fox, organic and inorganic compounds |
PRODUCTION PROCEDURE
Glass fused to steel tanks has the best properties of the strength and flexibility of steel and the corrosion resistance of glass.
The water storage tank is assembled on-site from special enamel steel plates, stirrups, self-locking bolts, special sealing material, and other accessories.
| 1. Raw steel sheets inspection | |
| 2. Laser cutting | |
| 3. Shot blasting | |
| 4. Arch bending | |
| 5. Automatic Enamel spraying (ground coating) automatic glaze spraying | |
| 6. Firing in the high-temperature Tunnel oven | |
| 7. Enamel spraying (surface coating) | |
| 8. Firing in the high-temperature oven | |
| 9. Product inspection | |
| 10. Packing | |
Roof: different roof types
Applications
| Potable/Drinking Water Storage |
| Fire Fighting Water Storage |
| Waste Water Treatment |
| Agricultural water storage |
| Sewage treatment |
| Industrial effluent processing |
| Anaerobic digestion & biogas and a range of other diversified market applications |
| Rainwater storage |
| Desalination plant water storage |
Glass-Fused-to-Steel Tanks Advantage
O Short construction period and low cost of construction.
O Superior corrosion resistance.
O Service life of more than 30 years.
O Easy installation and simple construction.
O Easy to remove and tank volume can be Freely expandable
O Beautiful appearance, customizable colours according to environmental needs.
O Low requirements for space area, no need for large installation equipment.
O Low climate effect, can be installed in most conditions.
Design Standard
AWWA-D103-09
EN15282-2007
ISO 28765:2016
AS 1657-2013 Fixed platforms walkways stairways and ladders
AS NZS 1170.2-2011 Amdt 2-2012 Structural design actions -Wind actions
AS 1170-2007 Structural design actions -Earthquake actions in Australia
GB 50017 2003
Certificate:
NSF61 ISO9001 ISO14001 ISO45001 ISO19001
1. Question: What is the thickness of a steel plate?
Answer: Normally the thickness is from 3 to 20 mm, our technical and design department will adjust according to your specific requirements, so as to meet your requirements and lower your budget.
2. Question: What is the material quality of your steel plate?
Answer: Our steel plate material is developed by our technicians combined with iron and steel materials experts, especially used in GFS tank production, it has excellent performance.
3. Question: How many coating layers are on the steel plate and how many times are fired in the furnace?
Answer: Our tanks have at least two layers and will be fired in the furnace at least two times, we can also make three layers and three time-fired tanks according to customer demand.
4. Question: What is your normal lead time?
Answer: According to the water tank quantity and the tank size that you need, it usually takes one week to one month time.
5. Question: Will you teach and guide us for the installation?
Answer: Certainly. GFS bolted tanks have the characteristics of easy installation. We will instruct you by video or at the site according to your concrete projects, and if you afford the related cost is okay. Pls, do not worry.
We are the Top 3 GFS tank manufacturers in Asia. We cooperated with many international prestigious tank companies, water treatment companies, and contractors. Once any inquiries, pls feel free to contact me~ Mushu (Sales Manager), We can show you some of our project cases for your reference.
