Audited Supplier
CE-XX
Electromagnetic
Digital Output
SemiConductor Integrated
Metal
0.5G
Switching Power Supply
IP65
ISO
Customized
IP54
Modbus
Analog Input, Anglog Output, Digital Output
Bluejay
Carton
10*10cm
China
Product Description
The power transducer is a 3-phase AC voltage isolation transducer. The AC voltage transducer applies the principle of electromagnetic isolation and true RMS measurement. After True-RMS (True-RMS) conversion, the 3 phase RMS current transducer can measure three-phase AC voltage non-sinusoidal alternating signal RMS, isolate, and linearly output standard voltage or current signal.
The 0-5A AC transducer is widely used in non-standard waveform distortion sine wave real-time signal detection and monitoring.
* Each phase voltage is a true RMS measurement;
* High precision and low-temperature drift;
* Small size and easy to install on-site;
* High reliability: it can be more than a 2KV surge.
* High precision and low-temperature drift;
* Small size and easy to install on-site;
* High reliability: it can be more than a 2KV surge.
item | value |
Model Number | CE-VJ41A-**MS3-0.5 |
Type | Current transducer |
Place of Origin | Zhejiang |
Usage | Industry, Railways, Electricity |
Theory | The principle of electromagnetic isolation |
Output | Voltage: 05V DC, 010VDC; Current:020mA, 4-20mA |
Model | CE-VJ41A-**MS3-0.5 |
Test condition | Room temperature: 25 |
Input range | 01V500VAC |
Output | Voltage: 05V DC, 010VDC; Current:020mA, 4-20mA |
Power supply | 12VDC, 15VDC, 24VDC |
Accuracy | 0.5 |
Load capacity | ≥2KΩ (voltage output); ≤250Ω (current output) |
Temperature drift | ≤350ppm/°C |
Isolation voltage | ≥2500 VDC |
Response time | ≤350 mS |
Rated power consumption | 0.5W (voltage output) 2W ( current output) |
Output ripple | ≤10mV |
Frequency | 05KHZ, 010KHZ |
Frequency range | 45~65Hz (up to 5K, please specify when ordering) |
Surge immunity | Power port level: ± 0.5KV (L-N/2Ω/integrated wave) Analog I / O port.± 0.5KV (L-N/40Ω/ integrated wave) |
Impulse immunity | Input/power port ± 2KV, Analog I / O port ± 1KV |
Input overload capacity | Voltage: 2 times the nominal value |
Operating temperature & Humidity | -10 ~ 60°C; ≤95 %( no dew) |
Storage temperature & Humidity | -55 ~+65°C; ≤95 % (no dew) |
Note: If you have any puzzles or requests about this product (including model number, data sheet, or any other aspects), please contact us immediately.
* Real-time signal detection and monitoring
* Power supplies
* Renewable energies
* Welding
* Traction
* Power supplies
* Renewable energies
* Welding
* Traction
