Audited Supplier
xcs-650pc
Shun Stick Folder Gluer
Automatic High-Speed Folder Gluer
Electric
Film
Max.300m/Min
8.5kw/380V
Straight Line, Crash Lock Bottom, Double Sides
Continuous Automatic Paper Feeding
200-650GSM Cardboad,E/ F/ N Corrugated Board
650mm
4.5t
14100mm*1350mm*1400mm(L*W*H)
Solute Property
30m/Min
60L
XCS
Wooden Packing
dimension(L*W*H): 14100mm*1350mm*1400mm
Dongguan, China
8441309000
Product Description
XCS-650PC-A Automatic Folder Gluer
| Model | XCS-650PC-A |
| Suitable paper | 200-650 g / m2 card paper |
| Box type | Standard: Straight line box, crash-lock bottom box, double sides box, Optional:4-corner box, 6-corner, CD Box |
| Feeder | Automatic continuously paper feeding |
| Max width | 650mm |
| Glue type | Solute style |
| Max. speed | 300m/min |
| Power | 10.5KW, AC220V/380V |
| Machine weight | 4.5T |
| Dimension | 14100mm*1350mm*1400mm(L*W*H) |
| Inching speed | 40m/min |
| Compressed air | 6 bar |
| Air compressor capacity | 10m/3 |
Function and Profile
2. Equipped with mobile adjustment for each plate , elaborate screw rod design, easy and fast operation by one people , high efficiency.
3. High efficiency speed conversion and powerful electric motor, equipped with strong belt for power transmission, high efficiency, low voice, easy maintenance and economic benefit.
4. Standard pre-folding , double sides and lock bottom folding , elaborate design, easy and fast operation.
5. The upper and lower glue tank equipped with unique design for special box.(Optional unit: hot&cold automatic gluing system)
6. The press folding and conveyor equipped with adjustive pressure design for special products and a set of special soft belt for average pressure to ensure the perfect quality.
7. Photo-electric count, viable and quantitative count, equipped with kick board identification equipment.
Feeder
1. Paper feeding independent motor frequency control.
2. Main motor speed ratio linkage, pasting box process to keep the box spacing stable.
Aligner section
1. Independent section with an unparallel lower carrier that guides the box to a parallel handrail that allows a perfect blank alignment.
Pre-folding section
1. Plates transportation (left 180º, right 135º), especially for the boxes' need to run on automatic packing flow line.
2. Can be upgraded for 4/6 corner box, servo control back system.
Bottom hook section
1. The bottom hook is equipped with a high-speed edge grinding machine and equipped with air suction and dust removal.
2. Unique design for upper and lower glue tank and matching products (optional for cold and hot glue automatic spraying system).
Final folding section
1. Lengthening this folding part to meet the long box folding requirements, such as LED box.
2. The upper and lower belt was driven by motor for smooth box transportation.
Output section and trombone section
1. The upper and lower carriers separately, which is conducive to adjust the length separately.
2. paper receiving belt and coordinate with guide roller, stable and not easy to cause the damage of the box.
Conveyor
1. The speed of the delivery pressure part can be adjusted automatically or manually according to the speed of the host machine.
2. The pneumatic adjustment of pressure,effective to facilitate the box paste.
3. Depending on the length of the box ,the output pressure part can move back and forth.
Counter device
1. The box counter coordinates with the photo-electricity, electromagnetic valve, and cylinder. When the box go through the photo-electricity counter and up to the setting number, cylinder will kick out by the side of the neat boxes to mark for the convenience of packing.
2. The photo-electricity counter and cylinder are controlled by the touch screen, and the number of each pack can be set between 0-9999, and each action time is between 0-99 seconds.
Operation system
1. Photo-electricity counting, quantity counting is available, pneumatic kicker for mark is used. Human-computer interface, which can be controlled scientifically, and easy operation.
About us:
FQA:
1. What is the machine warranty?
one year.
2. Does your machine with CE certificate?
Yes.
3. What's the payment term?
A:T/T 30% in advance, the balance paid before delivery. We also accept payment L/C.
4.What is the production time while placing order?
About 30 days.
5. What is the delivery time?
Within 30 days after get the payment.
6. Does the packing strong?
Yes, of course! All of our export packings is with strong wooden pallets, all are confirmed to export packing standard.
7. Are you manufacturer?
Yes, we are manufacturer, and we have been in this field for more than 10 years.
8. Do you have a stock product to sell?
Actually our machine need 20-30 days to manufacture, and there are many orders from China and foreign countries, so we need a custom one for you, and your order will be highly attention to manufacture.
9. How about after-sales service process?
When your machine has a problem, contact your sales and we will solve your problem as soon as possible.
10. Do you inspect the finished products?
Yes, we have QC department, they will inspection the machine before shipping, to ensure there is nothing problem of the machine.
11. Do you have your technical team?
Yes, we have our own technical team and we have our own patents. And we can custom the machine as customer want.
If you have any inquiry, please do not hesitate to contact us. We will reply to you at the first time as we can.
