Audited Supplier
Zhaga Sensor and Receptacle for Lighting Engineering
Zhaga Receptacle Parameter
| Model | RL-700 |
| Body Dimensions (mm) | Φ30*29.4 |
| Protection Cap Dimensions (mm) | Φ38.8*10.8 |
| Gasket Dimensions (mm) | 36.5*2.5 |
| Lock Nut Material | Zinc alloy |
| Gasket Material | PBT+phenolic |
| Body Protection | PBT |
| IK09 capable | OK |
| Can Add configure Connector | Dali 2.0 / 0-10 dimming |
| Application | 1. Outdoor Luminaires - Wall Packs - Parking Lots - Walkway. 2. Street and Area Lighting 3. photocell control
|
Detail description:
1. Standardized interface defined in Zhaga Book 18.
2. Compact size allowing greater fexibility in luminaire design.
3. Advanced sealing to achieve IP66 with no mounting screws.
4. Scalable solution allows use of Ø40mm photocell and a Ø80mm central management system with the same connection interface.
5. Flexible mounting position, upwards, downwards and sideways facing.
6. Integrated single gasket that seals to both luminaire and module that minimizes assembly time.
DaLI Configuration:
• Contacts rating: 1.5A, 30V (24V typical)
• Meets 10kV common mode surge test
• Hot pluggable capable
• 4 pole contacts
- Port 1 (Brown): 24Vdc
- Port 2 (Gray): DALI (or DALI based protocol) -
/common ground
- Port 3 (Blue): DALI (or DALI based protocol) +
- Port 4 (Black): General I/O
