Swipe or use the arrows to view product images.
15kv 630A High Voltage Disconnector Switch
| Price | $15.00 |
|---|---|
| Min Order | 10 Pieces |
| Availability | In Stock |
| Shipping From | Zhejiang, China |
| Popularity | 319 people viewed |
Model NO.:
15KV 630A
Type:
High-voltage
Structure:
Single-column Disconnector
Installation:
Outdoor High-voltage
Operation:
Manual
Grounding Mode:
Grounding
Movement Mode:
Plug-in Type
Number of Poles:
Three Pole
Grounding:
Single Ground
Series:
Single-Stage
Run:
Turn the Horizontal
Switching Mode:
Single Throw-in
Common Model:
YR
Structure of Operating:
Manual
Certification:
ISO, IS9001
Brand:
Haivol
Outdoor Installation:
Single Phase
Trademark:
HAIVOL
Transport Package:
Carton
Specification:
ANSI, IEEE, IEC
Origin:
China
HS Code:
3917310000
Product Description
product brief introduction
In electrical engineering, a disconnector, disconnect switch or isolator switch is used to ensure that an electrical circuit is completely de-energized for service or maintenance. They are only used for breaking the circuit and are often found in electrical distribution and substation, where machinery must have its source of driving power removed for adjustment or repair. Disconnectors can be manual or motor operated and may be paired with an earthing switch to ground the portion that has been isolated from the system for ensuring the safety of equipment and the personnel working on it.High-voltage isolation switches are used in electrical substations to allow isolation of apparatus such as circuit breakers, transformers, and transmission lines, for maintenance. The disconnector is usually not intended for normal control of the circuit, but only for safety isolation. Unlike load switches and circuit breakers, disconnectors lack a mechanism for suppression of electric arcs, which occurs when conductors carrying high currents are electrically interrupted. Thus, they are off-load devices, with very low breaking capacity, intended to be opened only after the current has been interrupted by some other control device.
Specification:
Rated voltage: 15KV
Rated current: 400A/630A
In electrical engineering, a disconnector, disconnect switch or isolator switch is used to ensure that an electrical circuit is completely de-energized for service or maintenance. They are only used for breaking the circuit and are often found in electrical distribution and substation, where machinery must have its source of driving power removed for adjustment or repair. Disconnectors can be manual or motor operated and may be paired with an earthing switch to ground the portion that has been isolated from the system for ensuring the safety of equipment and the personnel working on it.High-voltage isolation switches are used in electrical substations to allow isolation of apparatus such as circuit breakers, transformers, and transmission lines, for maintenance. The disconnector is usually not intended for normal control of the circuit, but only for safety isolation. Unlike load switches and circuit breakers, disconnectors lack a mechanism for suppression of electric arcs, which occurs when conductors carrying high currents are electrically interrupted. Thus, they are off-load devices, with very low breaking capacity, intended to be opened only after the current has been interrupted by some other control device.
Specification:
Rated voltage: 15KV
Rated current: 400A/630A
- Similar Products
$11.00
10 Pieces (MOQ)
Blue Sea 9001 350A Battery Switch for Yacht
Suzhou Electric Solution Co., Ltd.
$140.00
1 Piece (MOQ)
6kv Three-Column Disconnector 12kv Indoor Disconnector
Zhejiang Maiyu Electric Co., Ltd.
Negotiable
200 Pieces (MOQ)
Wanxiang Series Vh12-125 Switch Disconnection
Zhejiang Vekon Technology Co., Ltd.