$4.12
1 Kilogram/Kilograms (MOQ)
POM Polyformaldehyde High Tensile Strength Monofilament Fibre Concrete Plastic Synthetic Fiber
GANZHOU DAYE METALLIC FIBRES CO., LTD.
Swipe or use the arrows to view product images.
Synthetic Macro Fiber Polypropylene PP Fiber for Concrete Reinforcement Use in Filling Material
| Price | $2.50 |
|---|---|
| Min Order | 1000 kg |
| Availability | In Stock |
| Shipping From | Anhui, China |
| Popularity | 427 people viewed |
Model NO.:
embossed
Application:
Concrete Reinforcement
Color:
White
Length:
64 mm
Material:
High-strength Polypropylene Fiber
Tenacity:
High Tenacity
Type:
Microfiber
MOQ:
1000kg
Shelf Life:
Two Years
Package:
5kg/Carton
Width:
1.30-1.40mm
Minimum Tensile Strength:
>=550MPa
Modulus:
>=9000MPa
Trademark:
Briture
Transport Package:
5kg/ Box,
Specification:
1200-1300kgs/pallet, 12800kgs/1X20`FCL,
Origin:
China
HS Code:
5503400000
Product Description
Synthetic Macro fiber
Briture Synthetic Macrofiber is made of Polypropylene.
These fibers are wrapped in bundles of water-soluble film and packed in cartons. When used, just put the whole boxes of the fibers into concrete.
The cartons and film are dissolved in water and the fibers are evenly dispersed in the concrete mixture.
Available Length: 48mm, 54mm, 64mm..
1. All grades of concrete to provide good anti - fatigue, anti - shrinkage, anti - seismic and good toughness.
2. Simple operation, not easy to group, safety, reasonable price, cost savings..
3. It can be used in highly corrosive, humid environment.
4. The surface has been embossed, which greatly improved the cohesive force between fibers and concrete, and also boosts shrinkage resistance and crack resistance.
5. The strength of synthetic macro fiber is not as strong as that of steel fiber, but the experiment shows that under the same conditions, each cubic meter concrete needs 3kg-6kg of synthetic macro fiber, while steel fiber needs 25kg-40kg. The results show that the concrete with macro synthetic fiber has better toughness and anti-microcrack effect.
The dosage rate is dependent on the actual application however the minimum dosage range is 3kg/ m3-6kg / m3.
Shotcrete, concrete engineering, such as foundations, roads, Bridges, DAMS, especially in the deformation and toughness of the higher requirements of the project, such as mining and water conservancy and hydropower projects.
| Minimum Tensile Strength | ≥550MPa |
| Modulus | ≥9000Mpa |
| Fiber Dimension | L: 48mm/54mm/64mm;T: 0.55-0.60mm; W: 1.30-1.40mm |
| Melt Point | 170ºC |
| Density | 0.91g/cm3 |
| Melt flow | 3.5 |
| acid&alkali resistance | Excellent |
| Moisture Content | ≤0% |
| Appearance | Embossed |
5kg/ box, 1200-1300kgs/pallet, 12800kgs/1X20`FCL, 25600kgs/1X40`FCL.
- Similar Products
$1100.00
1 Ton (MOQ)
Cold Drawn Hooked End Steel Fiber Tensile Strength >
SAPEN INTERNATIONAL CO., LTD.
$10.00
100 Square Meters (MOQ)
Lightweight and Flexible Carbon Fiber Mesh for Easy Construction Installation
Jiangsu Nongchaoer Composite Material Co., Ltd.
$0.32
5000 Square Meters (MOQ)
Needle-Punched Geotextiles 100% Polypropylene Staple Fibers
Feicheng Lianyi Engineering Plastics Co., Ltd.
$8.00
1 Kilogram/Kilograms (MOQ)
ME310 Melt Extract Stainless Steel Fiber
GANZHOU DAYE METALLIC FIBRES CO., LTD.