Audited Supplier
7" PCD Cup for Concrete Coatings Removal
Item No: PCDCW004
Features:
- the PCD cups are installed on angle grinders for use
- The versatile PCD cup wheel scrapes and rips coatings of different thickness from the surface..
- The polycrystalline diamonds will never load up or smear the coatings like a metal bond diamond tool
- High quality PCD can make the diamond cup wheel work with aggressive speed.
- The PCD cup wheel is recommended working for dry
- Small size PCDs are designed for smooth and aggressive grinding specially.
Application:
Our PCD cups are manufactured with pro-quality PCD which makes it an ideal tool for removing the tough coatings on concrete floor surface. The coatings could be epoxy, mastics, glue, urethane, painting etc.
PCD bits are very hard and super abrasive resistance material which makes the PCD cup wheels quite easier for use.Unlike those diamond cup wheels, PCD cups never grind the coatings. Instead, it penetrates, cuts those coatings and remove them in quite an efficient way.
Our PCDCP004series PCD cup wheels are made specially with small size 3X3x8 mm PCD segments which could lead to a quite aggressive and smooth using. An angle grinder is always the right equipment for installing those PCD grinding wheels. 7/8" arbor with an 5/8"-11 /M14 threaded adapter are very common supplies.
Using tips:
- Always check the right installation of PCD cups before using.
- Do wear personal protection during work.
- Always check the removal of coating to make sure you are using the right pressure.
Sizes Available:
| Diameter | Arbor |
| 4.5" | 7/8" |
| 4.5" | 5/8"-11, M14 |
| 5" | 7/8" |
| 5" | 5/8"-11, M14 |
| 7" | 7/8" |
| 7" | 5/8"-11, M14 |
Special design, ODM, OEM service available upon request.
