Customized High Quality Ykc Type Round Hole Graphite Heat Exchanger

 Due to the unit graphite block design, damaged blocks can be quickly replaced;
- Gaskets are used between graphite blocks, no adhesive is required, installation and disassembly are simpler, and it is also easy to maintain the product;
- Adding graphite blocks can increase the area of the heat exchanger;
- The product has strong impact resistance;
- It can be designed as multi-flow, vertical, or horizontal.
Basic info

YKC round block hole type is a graphite heat exchanger with superior performance, which adopts upper and lower graphite heads and unit heat exchange block superposition structure.The cylindrical heat exchange block adopts standard unit blocks and has high structural strength. At the same time, PTFE O-rings or expanded PTFE (tetrafluoroelastic rope) are used in the equipment structure to seal the medium; pressure springs are installed as automatic compensation mechanisms for thermal expansion and contraction; in addition, short channels are used, and redistribution chambers are added to improve turbulent effects, etc., so that this heat exchanger has the characteristics of high structural strength, strong temperature and pressure resistance, good impact resistance, high volume utilization, high heat transfer efficiency, long service life and easy maintenance.
Technical features:

1. Design temperature: -20ºC-165ºC (can be raised to 240ºC when used as a heater)
2. Design pressure: normal pressure~0.4 MPa (can be designed and manufactured according to user needs to produce this type of product with a pressure of ~1.8 MPa)1
3. Heat exchange area: 2~500M2 (500-800M2 of this type of product can be customized)

Application:
This series of products can be used as heaters, coolers, and condensers. When used as a condenser, a gas-liquid separator is required.
The above only shows the parameter information of some specifications of the product, if you have other needs, please contact us to customize, thank you!
Product Category:
Pharmaceutical equipment, chemical equipment, food equipment (dairy beverages, condiments, wines), environmental protection equipment.
Product Standards:
Non-standard production of monomers, complete sets, system units and pressure vessels.
Design, production and acceptance criteria:
HG/T20569-1994,HG/T21571.2-2015TSG21-2016,GB150-1998.
Product Selection:
Titanium steel, 304/316L stainless steel, Hastelloy steel, duplex steel, composite plate, etc.
Applicable process:
Stirring, dissolving, neutralization, emulsification, homogenization, mixing, evaporation, crystallization, distillation, hydrogenation, alkylation, polymerization, condensation, constant temperature reaction, etc.
Mounting form:
Outside foot support, platform support, mobile type.
Drive Motor:
According to the working conditions, the simulation calculation formula is used to select the motor power, the number of poles and the brand; And confirm the explosion protection and protection level.
Sealing form:
Single-acting mechanical seals, direct-coupled single-acting mechanical seals, double-acting mechanical seals, and static spring seals for kettles.
Selection of agitator:
According to the process requirements, the working form of the stirring paddle can be selected by hydrodynamic simulation calculation.

If you have any other needs about the product, you can contact us!