Audited Supplier
99.95% pure molybdenum sheets with sandblasted surface
Molybdenum sheets from 0.005 inches to 0.150 inches in thickness is classified as
molybdenum refractory sheet. It is used for fabrication of sintering boats, high
temperature furnace heating elements and heat shields.
Molybdenum plates from 0.187 inches to 3 inches in thickness is classified as
molybdenum refractory plate. It is widely used in the construction of furnace tooling
and parts and as a feed stock for the fabrication of parts for the electronics and
semiconductor industries,
1) Specification:
| Products | molybdehum sheets, molybdenum plates |
| Name of material | Molybdenum ( Pure): Mo>=99.95% TZM: 0.5% Ti / 0.08% Zr / 0.01-0.04 C Molybdenum lanthanum alloy: 0.3% - 0.6% La2O3 |
| Density at 20 degree | 10.2g/cm3 |
| Size | Thickness:>=0.1mm Width: 20-900mm |
| Standard | ASTM, GB3876-83 |
| Surface | Hot rolling, Alkali washing, cold rolling, polished. |
| Characteristics: | high melting point(2610C), high strength, high level of thermal conductivity, a low coefficient of thermal expansion, excellent resistance to oxidation at high temperatures, excellent resistance to electrochemical corrosion, |
| 2) The sizes and tolerance for molybdenum sheets & plates: | ||||||
| Thickness | tolerances | width | tolerances | length | tolerances | flatness(%) |
| 0.1mm | ±0.01mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 0.2mm | ±0.02mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 0.3mm | ±0.02mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 0.4mm | ±0.03mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 0.5mm | ±0.03mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 0.8mm | ±0.05mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 1mm | ±0.06mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 1.5mm | ±0.06mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 2mm | ±0.06mm | 600mm | ±1mm | 2000mm | ±1mm | < 2% |
| 3mm | ±0.2mm | 500mm | ±1mm | 500mm | ±1mm | < 2% |
| 4mm | ±0.2mm | 500mm | ±1mm | 500mm | ±1mm | < 2% |
3) The purity guarantee for the molybdenum sheets & plates:
| Al | Bi | Sb | Ni | Sn | Cu | Cd |
| <0.001 | <0.001 | <0.001 | <0.001 | <0.001 | <0.001 | <0.001 |
| Ca | Mg | Si | P | Pb | Fe | O |
| <0.001 | <0.001 | <0.003 | <0.001 | <0.001 | <0.001 | <0.002 |
| C | N | Mo | ||||
| <0.001 | <0.002 | >=99.95 |
Company information:
Zhengzhou Shibo Nonferrous Metals Products Co., Ltd, as a high technology enterprise was established in 2005, located in Zhengzhou City, Henan Province, China, with registered capital of RMB 20 million, covered an area of more than 6000 square meters and employee more than 100 peoples, we specialized in manufacturing tungsten&molybdenum ( powder, sheets, rods wires, parts, etc ), MoSi2&SiC heating elements, high temperature lab muffle furnaces, tungsten copper alloy, including the development, production, and sales, we always provide our customers top quality products and best service.
