Audited Supplier
JB-30
Online Service
1 Year
ASTM C368
Hunan Zhenhua
Export Plywood Case
0.3CBM
China
9031809090
Product Description
JB-30 Ceramic tableware impact resistance tester
JB Daily use ceramics impact tester is applied to (1) the impact test of flat utensils center and hollow ware center and edge; (2) broken test of the edge of a flat utensils the sample can be glazed, or not. It applies to the Standard Test Method for Impact Resistance of Ceramic Tableware ASTM C368 and the Standard test method for lashing toughness of domestic ceramic GB/T 4742, QB/T 1993-2012.
The impact tester on test center is used to measure:
(1) impacting energy of a initial crack; (2) completely broken energy.
Main technical specifications:
1. The greatest impact energy: 2.156J;
2. The smallest sub-set value of dial: 0.028J;
3. Pendulum biggest tilt angle: 120;
4. Distance from the center to the impact point of Pendulum shaft: 300 mm;
5. The greatest lifting distance of workbench 120 mm;
6. The largest vertical distance of workbench: 210 mm;
7. Sample specifications: 6-inch to 10 and a half inches flat plate; height: not more than 10 centimeters, caliber: less than 8 cm like bowl category; caliber: not less than 8cm like Cup-type.
8,Net weight: 50kg
9,Overall dimensions:890×370×925(mm)
JB Daily use ceramics impact tester is applied to (1) the impact test of flat utensils center and hollow ware center and edge; (2) broken test of the edge of a flat utensils the sample can be glazed, or not. It applies to the Standard Test Method for Impact Resistance of Ceramic Tableware ASTM C368 and the Standard test method for lashing toughness of domestic ceramic GB/T 4742, QB/T 1993-2012.
The impact tester on test center is used to measure:
(1) impacting energy of a initial crack; (2) completely broken energy.
Main technical specifications:
1. The greatest impact energy: 2.156J;
2. The smallest sub-set value of dial: 0.028J;
3. Pendulum biggest tilt angle: 120;
4. Distance from the center to the impact point of Pendulum shaft: 300 mm;
5. The greatest lifting distance of workbench 120 mm;
6. The largest vertical distance of workbench: 210 mm;
7. Sample specifications: 6-inch to 10 and a half inches flat plate; height: not more than 10 centimeters, caliber: less than 8 cm like bowl category; caliber: not less than 8cm like Cup-type.
8,Net weight: 50kg
9,Overall dimensions:890×370×925(mm)
