Audited Supplier
RP-M0750-C2-PD62-C1151-S0-CN
Magnetostrictive Displacement Sensor
Can Bus Output
Linear Displacement
SemiConductor Integrated
Metal
1 / 2 / 5 / 10 / 20 / 50 / 100 μm
IP65
CE
Customized
25~5500 mm
Canbus
1 / 5 / 10 / 20 / 50 / 100 μm
<±0.01% of Full Scale
<±0.001% of Full Scale,
<10μm
<15ppm/ºC
Arbitrary
IP67rh Stainless Steel Rod
-40ºC ~ +85ºC
35MPa (Continuous)/70MPa (Peak)
+24VDC±20%
<80mA (Varying with Range)
Max.-30VDC
Max.36VDC
TEC Sensors
Paper Tube
China
90318090
Product Description
| Output: | Can bus output |
| Measuring length: | 25-5500 mm |
| Repeat accuracy: | <+0.001% of full scale, min ±1μm |
| Non-linearity: | <+0.01% of full scale, min ±50 μm |
| Operating voltage Ub: | +24Vdc ± 20% |
| Ambient temperature: | -40°C ~+85°C |
| Mechanical configuration: | Fastening M20 threads, Fastening M18 threads, Fastening 3/4" threads |
| Housing material: | Aluminum alloy |
| IP rating: | IP67 |
| Approval/Conformity: | CE |
TEC magnetostrictive displacement sensor is a new generation of linear displacement sensor independently developed by Zheda
Jingyi. It can provide users with real-time, reliable, accurate and continuous linear displacement signals under harsh working environment,
and is widely used in metallurgical equipment, wind power equipment, construction machinery, rubber machinery, port machinery,
energy and other industrial automation fields.
RP Series aluminum profile provides flexible and simple external installation mode, which is suitable for stroke or position detection of linear motion mechanism, and can also be used for external position detection of hydraulic cylinder.
Note: The measurement Non-usable area shown in the figure indicates that the output value of the sensor in this area is zero or unreliable. The default value of the measurement Non-usable area at the head and end of this product is 28mm and 66mm respectively. The value of the measurement Non-usable area can be modified appropriately according to the customer's needs, please pointed out when ordering.
Note: The measurement Non-usable area shown in the figure indicates that the output value of the sensor in this area is zero or unreliable. The default value of the measurement Non-usable area at the head and end of this product is 28mm and 66mm respectively. The value of the measurement Non-usable area can be modified appropriately according to the customer's needs, please pointed out when ordering.
