Swipe or use the arrows to view product images.
Complete Set of Intelligent Equipment for Underground Mining Cutting Tunnel Jumbo
| Price | $99999999.00 |
|---|---|
| Min Order | 1 Piece |
| Availability | In Stock |
| Shipping From | Hunan, China |
| Popularity | 485 people viewed |
Model NO.:
CY-T313C
After-sales Service:
24 Hours on Online and Replay
Warranty:
1000hours and 1 Year Whichever Comes First
Certification:
ISO 9001:2000, ISO 9001:2008
Condition:
New
Motor:
AC Motor
Drill Hole Diameter:
150-200mm
Drill Hole Depth:
6.3m
Bit Type:
Drag Bit
Drilling Way:
Rotary
Voltage:
1000V
Trademark:
Chuangyuan
Transport Package:
15697mm*2200mm*3500mm
Specification:
15697mm*3134mm*4400mm
Origin:
China
Product Description
The cutting tunnel jumbo adopts a three-arm combination design with dual tunneling arms and a cutting arm. It enables simultaneous cutting and tunneling operations, completing blasting and cutting holes simultaneously. This design saves more than 20% of rock drilling time, with tunneling blast holes reaching a depth of 6m and cutting holes reaching 6.3m in one operation. It achieves single drifting footage of over 5.5m per cycle.
Deep single rock drilling depth
Using a composite extended propeller design, the depth of rock drilling blast holes can reach up to 6m.
Cutting and rock drilling coordinated operation
Three-arm independent control, cutting and tunneling synchronized cooperation.
Wide operating range
Designed with dual propellers, it achieves broad coverage of rock drilling section.
| Deep single rock drilling depth Using a composite extended propeller design, the depth of rock drilling blast holes can reach up to 6m. Cutting and rock drilling coordinated operation Three-arm independent control, cutting and tunneling synchronized cooperation. | Wide operating range Designed with dual propellers, it achieves broad coverage of rock drilling section. |
| A(mm) | B(mm) | C(mm) | D(°) | E(°) | F(mm) | G(mm) | H(mm) | I(mm) |
| 15697 | 3810 | 442 | 16 | 16 | 2600 | 3500 | 900 | 2200 |
| J(mm) | K(mm) | L(mm) | M(°) | N(°) | P(mm) | Q(mm) | S(mm) | T(mm) |
| 500 | 3134 | 8500 | 4000 | 40 | 10000 | 7800 | 4200 | 3500 |
| Item | Unit | Value | ||
| Cutting | Tunneling (composite beam) | |||
| Parameters of rock drill | Shank | / | T60 | R38/T38 |
| Hole diameter | mm | 127~180 | 38~64 | |
| Maximum impact power | kW | 35 | 18 | |
| Maximum turning torque | N.m | 2285 | 1050 | |
| Propelling beam parameters | Total length | mm | 5310 | 4910 |
| Drilling depth | mm | 6300 | 6000 | |
| Feed force | kN | 20 | 15 | |
| Tunneling drill arm parameters | Propeller compensation | mm | 1800 | |
| Rotation of propelling beam | ° | 360 | ||
| Arm pitch | ° | -25/55 | ||
| Walking parameters | Diesel engine power | kW | 96 | |
| Departure angle | ° | 16 | ||
| Approach angle | ° | 16 | ||
| Grade ability | ° | 14 | ||
| Walking speed | km/h | 3.7 | ||
| Electrical system | Main engine power | kW | 55/75 | |
| Voltage | V | 1000 | ||
| Frequency | Hz | 50 | ||
| Hydraulic system | Maximum system pressure | bar | 250 | |
| Hydraulic oil tank volume | L | 480 | ||
| Filtration accuracy | μm | 10 | ||
| Water supply system | Motor power | kW | 7.5 | |
| Maximum flow rate | L/min | 400 | ||
| Gas supply type | Rated power | kW | 11 | |
| Maximum flow rate | L/min | 1970 | ||
- Similar Products
$30000.00
1 Piece (MOQ)
Earth Auger Yds2500-Yds4000 for Soil Drilling
Zhangjiagang Free Zone Yongda Machinery Co., Ltd.
Negotiable
1 Set (MOQ)
High Performance Hydraulic Power Drilling Rig (HFG-33J)
Jiaozuo Hanfa Industrial Co., Ltd.